
Minnesota Cannabis Toll Processing in 2026: The OCM Service Transfer Form and Metrc Processing Transfers
A source-cited walkthrough for licensed Minnesota businesses moving cannabis to another licensee for a paid processing service. Not legal advice.
Not legal advice. This article summarizes documents published by the Minnesota Office of Cannabis Management (OCM), Metrc, the Minnesota Revisor of Statutes, and Laws of Minnesota 2026, chapter 123. It is written for licensed businesses. It is not a legal opinion, and it is not a substitute for reading those documents or talking to your own counsel. Rules and Metrc screens change. Confirm the current form and bulletin before you create a manifest.
Toll processing is the practical name for a paid service: a licensed business sends cannabis to another licensed business, that business processes or manufactures it, and product often comes back. In 2026, OCM and Metrc both describe how that movement is supposed to be recorded. The two documents that do the operational work are the OCM Service Transfer Form and Metrc Support Bulletin MN_IB_0073, distributed and effective September 4, 2026.
If you are sending biomass to BSD Labs for extraction, the commercial service is on our toll processing page. The paperwork below is the state's, not a BSD Labs form.
What the statute changed
Minnesota Statutes section 342.23, subdivision 5(a) prohibits a cannabis business or hemp business from offering, giving, accepting, receiving, or borrowing money or anything else of value, or accepting or receiving credit, from another cannabis or hemp business. The prohibition also covers paying for preferential retail placement. It applies to every cooperative member and every director, manager, and general partner of the business.
Subdivision 5(g), added in 2026, is the services exception the Service Transfer Form cites. It says the prohibition in paragraph (a) does not apply to any transaction entered into in good faith by a cannabis business or hemp business for the sale of goods or services at fair market value.
That language is in Laws of Minnesota 2026, chapter 123. The chapter was presented to the governor on May 20, 2026, and signed on May 26, 2026. The chapter says its sections are effective August 1, 2026, unless a section states otherwise. The amendment to section 342.23 says that section is effective the day following final enactment. OCM's September 22, 2026 Cannabis Compliance Connector tells licensees that many of the 2026 chapter 342 changes went into effect on August 1, and it tells them to use chapter 123 for the legislative text. Read the section you are relying on. This article does not decide which effective-date clause controls a particular contract.
Guidance Memo GM-2026-05
The same September 22, 2026 OCM bulletin says Metrc's new processing transfer type can be used for transferring product for a service, and that more information is in Guidance Memo GM-2026-05. We could not retrieve an official copy of GM-2026-05 from OCM's public pages while writing this, so this article does not summarize that memo and does not treat third-party writeups of it as a source.
The Metrc transfer type
Bulletin MN_IB_0073 says every Metrc transfer has to be categorized by a transfer type. For a processing service, two labels appear in that bulletin, and both are quoted here so they are not collapsed into one:
- The transfer-type table calls the row Processing. It requires an authorized transporter. It does not require a recorded sale price. It does require a Services Form PDF.
- The PDF-upload section says the upload appears in the New Licensed Transfer window after the originating facility selects the type Processing Transfer.
Metrc defines a processing transfer as a cannabis business transferring cannabis or cannabis product to another licensed cannabis business for the purpose of providing service at fair market value. The bulletin says this includes processing or manufacturing a product, or removing contaminants, which it describes as pretreatment or remediation.
The bulletin also says products sent to another facility may not be required to be tested before the transfer, and it tells the reader to review the Cannabis Technical Authority. Separately, it says a licensed cannabis business is not allowed to sell or offer for sale cannabis plants, cannabis flower, cannabis products, and hemp-derived consumer products that have not passed all required testing, citing Minnesota Statutes section 342.61, subdivision 1(a), and the Cannabis Technical Authority. This article does not restate section 342.61 beyond that sentence. Use the statute and the technical authority before you decide a package can move untested.
Dates in the bulletin, not inferred from it: new transfer types were added in Metrc on September 4, 2026, and could be used immediately. Discontinued transfer types were to be removed from Metrc on September 23, 2026. The bulletin does not name the discontinued types in the text we reviewed, so this article does not list them.
Where the Service Transfer Form goes
The form itself says the licensed cannabis business initiating the transfer — the shipper — must submit it in Metrc along with the transfer manifest for each transfer. Attach a copy when completing the transfer in Metrc. The form says its purpose is to notify OCM of an agreement to transfer cannabis or cannabis products for toll processing. The examples it gives are manufacturing as a service, remediation, and pre-treatment. It cites section 342.23, subdivision 5(g).
Metrc says the blank form is on the OCM website under Inventory Management. The public file we retrieved is the fillable PDF linked above. In Metrc, the bulletin says the PDF upload sits beneath the packages on the manifest screen.
What the bulletin says you can do with that PDF after it is attached:
- The destination license sees a Download PDF button for that transfer on the Incoming Transfers tab.
- Until the destination accepts the transfer, the originating license can open the transfer on Outgoing Transfers, choose Edit, download the existing PDF, or remove it and upload a new one.
- The PDF can be edited, or removed by changing the transfer type, until the transfer manifest has been accepted by the transporter license.
Questions about the processing transfer, the bulletin says, go to OCM at metrc.ocm@state.mn.us.
What the form asks for
The fillable form is four sections. This is a description of those fields, not a copy of the form.
Section 1, business information. Shipper and receiver each provide a license number, site contact name, contact email, and contact phone. Someone signs as the submitter and marks whether the submission is affiliated with the shipper or the receiver. The submitter certifies that the service agreement complies with Minnesota Statutes chapter 342 and Minnesota Rules chapter 9810.
The form warns that a transfer for services, processing, or purposes not allowed by chapter 342 or chapter 9810 may result in an OCM enforcement action. The penalty language printed on the form includes an administrative penalty of up to $10,000 per violation, or an amount that deprives the business of any economic advantage gained by the violation, or both, and possible referral to law enforcement. Read that warning on the form before you sign it.
Section 2, product coming back. If this manifest returns product from a processing or service agreement that was already submitted to OCM, you enter the original transfer manifest number. The form says that if you are transferring product back after a completed service, you do not have to complete any other section. Leave the manifest number blank if this is a new service-agreement disclosure.
Section 3, the service itself. For a new disclosure, the form asks for the agreement date (the date every party signed), an approximate start date and end date, and whether product will be transferred back to the originating business. You complete one description that matches the transaction:
- Manufacturing as a service: type of manufacturing process, output product, estimated quantity produced.
- Pre-treatment or remediation: type of treatment, output product, estimated quantity produced.
- Packaging as a service: output product and estimated quantity produced.
- Other service: a description.
On remediation, the form is specific: all remediation plans must be approved by OCM before the product is transferred. If the service you want is not one of the types listed, the form says to contact legal counsel to determine whether the service is allowed. This article does not describe a separate remediation-request workflow, because that workflow is not in the form or the Metrc bulletin we retrieved.
Section 4, compensation. The form asks how the service is paid. The choices printed on it are a flat fee (total payment), time-and-materials (expected payment and a description), yield-based (expected payment per unit and a description), share of profit or revenue, with consignment given as an example (expected payment in dollars or a percentage, plus a description), or other. It says a share of profit or revenue may include joint ownership of product or splitting an output batch. It also points to section 342.23, subdivision 1(a), for the duty to make financial records available to OCM on request.
Revenue share and true parties of interest
The form's TPOI warning is the part to slow down on. It says that under Minnesota Statutes section 342.185, a true party of interest includes a person or business with the right to take a share of a cannabis business's revenue, gross profit, or net profit. The current statute, subdivision 1(g)(1)(ix), says a true party of interest includes someone who has the right to receive some or all of the revenue, gross profit, or net profit from a cannabis business during any full or partial calendar or fiscal year. The form cites subdivision 1(g)(9) for that idea. Subdivision 7 says applicants and license holders must disclose all true parties of interest and have a continuing duty to notify the office of any change, in the form and manner the office specifies.
The form then applies that definition to service deals: if a licensed cannabis business provides services in exchange for a share of another cannabis business's profits or revenue, that business is a true party of interest, and the business is required to inform OCM. The form says submitting the Service Transfer Form can be considered that notice. It also says OCM strongly recommends that businesses contact legal counsel before signing any revenue or profit-sharing agreement, and that incomplete or inaccurate information may be referred to OCM's Division of Compliance and Enforcement.
The same statute lists people who are not true parties of interest. Two of those exclusions matter to a processing contract, and they are narrower than "any vendor." A consultant receiving a flat or hourly rate under a written contract is excluded. A person with a contract for services, such as a branding or staffing company, is excluded as long as that person does not obtain any ownership or control of the cannabis business. Whether a particular tolling agreement fits an exclusion is a question for counsel. The form's own instruction is to get that advice before a revenue-share signature.
The form also says OCM may request more information about the agreement, and it cites Minnesota Rules, part 9810.1100, subpart 3, for the idea that financial and business-to-business contract information must be provided on request. The rule we read is more specific than that paraphrase. Part 9810.1100, subpart 3, requires a cannabis business to keep accurate financial records, including vendor and business-to-business contact information, and to make all financial records available to the office for inspection on request. Keep the contract where you can produce it.
A practical sequence for a new processing run
Putting the form and the bulletin together, a new outbound processing transfer looks like this. Nothing here adds a step those documents do not describe.
- Confirm the other party is a licensed cannabis business and that the deal is a good-faith sale of services at fair market value under section 342.23, subdivision 5(g). If compensation is a share of profit or revenue, talk to counsel about the true-party-of-interest disclosure before you sign.
- If the work is remediation, get the remediation plan approved by OCM before the transfer. The form states that requirement on its face.
- Complete the Service Transfer Form. For a first shipment, leave the original-manifest field blank and fill in sections 1, 3, and 4.
- In Metrc, create the licensed transfer as a Processing / Processing Transfer, using the label the screen shows. An authorized transporter is required. A sale price is not required on this transfer type. Attach the completed form as a PDF beneath the packages.
- When finished product comes back, the form says the return manifest can carry the original transfer manifest number and does not need the other sections filled in again.
Where BSD Labs fits
Canna Social LLC dba BSD Labs toll-processes biomass for licensed Minnesota cultivators and manufacturers at 2300 Brown Ave Ste 170, Waseca, MN 56093. The commercial terms, including whether a run is a cash fee or another structure, are agreed with the partner. The Metrc manifest and the Service Transfer Form are still the shipper's filing. If you want to scope a run, use the contact form or read the toll processing service.
Sources
- OCM Service Transfer Form (fillable PDF on mn.gov)
- Metrc Support Bulletin MN_IB_0073, Transfer Types Definitions and Manifest Enhancements, distribution and effective date September 4, 2026
- Minnesota Statutes section 342.23, including subdivision 5(g)
- Laws of Minnesota 2026, chapter 123, signed May 26, 2026
- Minnesota Statutes section 342.185, true party of interest
- Minnesota Rules, part 9810.1100, general operations, including financial-record inspection
- OCM Cannabis Compliance Connector, September 22, 2026, which names Metrc bulletin 73 and Guidance Memo GM-2026-05
Minnesota-licensed extraction, distillation, vape cart manufacturing, and wholesale distribution.
Get In Touch